LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (3.2L Engine (Service Information)) >> Engine Mounting >> Insulator, Engine Mount, Rear >> Removal

Insulator, Engine Mount, Rear: Removal

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle.
  2. Remove the belly pan. Refer to BELLY PAN, REMOVAL .
    GC0160125Courtesy of CHRYSLER GROUP, LLC
  3. Remove the front transmission strut to pivot through bolt (1).
  4. Remove the transmission strut to crossmember through bolt (3).
    GC0159181Courtesy of CHRYSLER GROUP, LLC
  5. Loosen the strut cover bracket nuts (2).
  6. Rotate the engine forward and remove the strut (3).
  7. If required, remove the transmission pivot mount bracket from the transmission.
scientia non olet · About LEMON Manuals