Diagnostic Test

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FOR AN ACTIVE DTC

Turn the ignition on.
With the scan tool, create a Vehicle Scan Report and attach it to the repair order.
With the scan tool, read the Electric Parking Brake (EPB) DTCs.
NOTE:
This Diagnostic Trouble Code will set if the Body Control Module (BCM) is not configured for Electric Parking Brake (EPB) Module.

Is the DTC active or stored?

Yes
- Program the BCM with the correct sales code. Refer to MODULE PROXI REQUIREMENTS .
- Perform the EPB VERIFICATION TEST. Refer to STANDARD PROCEDURE .
No
- Review the Vehicle Scan Report and Repair any other DTCs that have set with the appropriate procedure in Service Information.