Link, Trailing, Rear: Removal
WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
- Remove the wheel mounting bolts, then the tire and wheel assembly.
- Remove the routing clips attached to the trailing link (3).
- Remove the three bolts (4) securing the knuckle to the trailing link (3).
- Remove the two bolts (1) fastening the leading end of the trailing link (2) to the body.
- Remove the trailing link.