LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Rear Suspension) >> Link, Toe >> Removal

Link, Toe: Removal

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
GC0159361Courtesy of CHRYSLER GROUP, LLC
  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Remove the wheel.
    NOTE:

    Mark the position of the cam nut/bolt on the cradle side for installation.

  3. Remove and DISCARD  the toe link to cradle bolt/nut (1) and the toe link to knuckle bolt/nut (3) and remove the toe link (2) from the vehicle.
scientia non olet · About LEMON Manuals