Core, Heater: Removal
WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The HVAC housing assembly must be removed from vehicle for service of the heater core.
- Remove the HVAC housing assembly and place it on a workbench. Refer to HOUSING, HVAC, REMOVAL .
- Remove the wire harness from the retaining clips (2) on the heater core cover.
- Remove the retaining screws (1) from the heater core tubing cover and remove the heater core tubing cover from the left side of HVAC housing.
- Remove heater core (1) from the left side of HVAC housing (2).