Technical Specifications: Specifications
WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Brake Shield | 8 | - | 71 |
| Hub and Bearing to Knuckle Mounting Bolts | 40 + 65° | 30 + 65° | - |
| Hub Nut | 200 | 148 | - |
| Lower Ball Joint to Control Arm Nut | 25 plus 175° | 18 plus 175° | - |
| Lower Control Arm Front Horizontal Pivot Bolt | 90 Plus 120° | 66 Plus 120° | - |
| Lower Control Arm Rear Vertical Bolt | 70 Plus 90° | 52 Plus 90° | - |
| Stabilizer Bar to Cross-member Mounting Front Bolts | 65 | 48 | - |
| Stabilizer Bar to Cross-member Mounting Rear Bolts | 39 | 29 | - |
| Stabilizer Bar Link to Stabilizer Bar | 96 | 71 | - |
| Stabilizer Bar Link to Strut | 105 | 77 | - |
| Strut-to-Knuckle Lower Retaining Bolt | 110 | 81 | - |
| Strut Rod Nut | 65 | 48 | - |
| Suspension Cross-member to Front Support Beams Bracket | 90 | 66 | - |
| Suspension Cross-member Mounting Bolts | 125 + 45° | 92 + 45° | - |
| Suspension Cross-member Mounting Bolts - Above Control Arms | 100 | 74 | - |
| Tie Rod Adjuster Jam Nut | 80 | 59 | - |
| Tie Rod End Knuckle Nut | 30 Plus 90° | 22 Plus 90° | - |
| Wheel Mounting (Lug) Bolts - Aluminum | 130 | 96 | - |