LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Exhaust System) >> Sensor, Exhaust Temperature >> Removal >> 2.0L Diesel EGT Sensor 1/2

2.0L Diesel EGT Sensor 1/2

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
GC0157479Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the engine cover (1).
    GC0153960Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the Exhaust Gas Temperature (EGT) sensor wire harness connector (1).
  4. Detach the EGT sensor wire harness connector (1) from bracket.
  5. Remove the EGT sensor (2).
scientia non olet · About LEMON Manuals