LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Exhaust System) >> Pipe, Exhaust CROSSUNDER >> Removal >> 2.2L Diesel

2.2L Diesel

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

The normal operating temperature of the exhaust system is very high. Therefore, never attempt to service any part of the exhaust system until it is cooled. Special care should be taken when working near the catalytic converter. The temperature of the converter rises to a high level after a short period of engine operation time.

  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Remove the belly pan. Refer to BELLY PAN, REMOVAL .
  3. Remove the exhaust resonator. Refer to RESONATOR, EXHAUST, REMOVAL .
    GC0169979Courtesy of CHRYSLER GROUP, LLC
  4. Remove the nuts (1), bolt (3) and the support bracket (2).
    GC0160079Courtesy of CHRYSLER GROUP, LLC
  5. Remove the cross-under pipe isolator bolts (5).
  6. Remove the flange nuts (3) and the cross-under pipe (4) from the vehicle.
scientia non olet · About LEMON Manuals