Oil Supply Tube Installation
WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Replace the O-ring seal (1) near the differential end for the oil supply tube.
- Replace the O-ring seal (1) near the transmission end for the oil supply tube.
- Install the oil supply tube (2) onto transmission.
- Install the oil supply tube bolts (1 and 3) and tighten to the proper torque specification. Refer to TECHNICAL SPECIFICATIONS .
- Install the left front tire and wheel assembly. Refer to INSTALLATION .
- Fill the transmission to the proper level with the correct fluid. Refer to FLUID AND FILTER, STANDARD PROCEDURE .