Reaction Shaft
WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the transmission from the vehicle. Refer to REMOVAL .
- Drain the fluid from the transmission.
- Remove the bellhousing from the transmission. Refer to BELLHOUSING, REMOVAL .
- Remove the bolts (2) holding the reaction shaft (1) to the intermediate support plate (4).
- Separate the reaction shaft (2) from the intermediate support plate (1).
- Remove the seal rings (1) from the ring lands in the inner reaction shaft hub (2).
- Remove the seal ring (1) from the ring land in the outer reaction shaft hub (2).