Sensors, Speed: Installation
WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
The input and output speed sensors are serviced as an assembly.
- Insert the wire harness connector into the speed sensor assembly.
- Engage the lock on the wire harness connector.
- Insert the speed sensor assembly (1) into the transmission housing.
- Install the screw (1) to hold the speed sensor assembly to the transmission housing.
- Install the valve body. Refer to VALVE BODY, INSTALLATION .
- Road test the vehicle to verify repair.