Section 28 (Automatic Transmission (Service Information)): Cover: Installation
WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Install the cover plate (2) with a NEW gasket.
- Install the cover plate bolts and tighten to the proper torque specification. Refer to TECHNICAL SPECIFICATIONS .
- Check the transmission fluid level. Refer to FLUID AND FILTER, STANDARD PROCEDURE .
- Install the left inner splash shield. Refer to SHIELD, SPLASH, REAR WHEELHOUSE, INSTALLATION .
- Install the left front wheel and tire assembly. Refer to INSTALLATION .