Personal Settings Mode (Customer Programmable Features)
WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Allows the driver to set and recall features when the transmission is in Park by pressing and releasing the MENU button until Personal Settings is displayed in the EVIC. Pressing and releasing the STEP button will scroll through the following personal settings choices:
- Language
When in this display you may select one of five languages for all display nomenclature, including the trip functions and the navigation system (if equipped). Press the RESET
button while in this display to select English, Espanol, or Francais. Then, as you continue, the information will display in the selected language.NOTE:
The EVIC will not change the UConnect™ language selection.
- Lock Doors Automatically at 15 mph (24 km/h) When ON is selected, all doors will lock automatically when the vehicle reaches a speed of 15 mph (24 km/h). To make this selection, press and release the RESET button until "ON" or "OFF" appears.
- Unlock Doors Automatically on Exit When ON is selected, all doors will unlock when the vehicle is stopped and the transmission is in the P (Park) or N (Neutral) position and the driver's door is opened. To make this selection, press and release the RESET button until "ON" or "OFF" appears.
- Remote Key Unlock When DRIVER DOOR 1ST PRESS is selected, only the driver's door will unlock on the first press of the Remote Keyless Entry (RKE) unlock button. When Driver Door 1st Press is selected, you must press the RKE unlock button twice to unlock the passengers doors. When ALL DOORS 1ST PRESS is selected, all of the doors will unlock on the first press of the RKE unlock button. To make this selection, press and release the RESET button until "Driver Door 1st Press" or "All Doors 1st Press" appears.
- Sound Horn with Remote Key Lock When ON is selected, a short horn sound will occur when the remote keyless entry "Lock" button is pressed. This feature may be selected with or without the flash lights on lock/unlock feature. To make this selection, press and release the RESET button until "ON" or "OFF" appears.
- Flash Lights with Remote Key Lock When ON is selected, the front and rear turn signals will flash when the doors are locked or unlocked with the remote keyless entry transmitter. This feature may be selected with or without the sound horn on lock feature selected. To make this selection, press and release the RESET button until "ON" or "OFF" appears.
- Delay Turning Headlights Off When this feature is selected, the driver can choose to have the headlights remain on for 0, 30, 60, or 90 seconds when exiting the vehicle. To make this selection, press and release the RESET button until "0," "30," "60," or "90" appears.
- Turn Headlights On with Remote Key Unlock When this feature is selected, the headlights will activate and remain on for up to 90 seconds when the doors are unlocked with the remote keyless entry transmitter. To make this selection, press and release the RESET button until "OFF," "30 sec.," "60 sec.," or "90 sec." appears.
- Headlights On with Wipers (Available with Auto Headlights Only) When this feature is selected and the headlight switch is in the AUTO position, the headlights will activate approximately 10 seconds after the wipers are turned on. To make this selection, press and release the RESET button until "ON" or "OFF" appears.
- Delay Power Off to Accessories Until Exit When this feature is selected, the power window switches, radio, hands-free system (if equipped), DVD video system (if equipped), power sunroof (if equipped), and power outlets will remain active for up to 10 minutes after the ignition switch is turned off. Opening a vehicle door will cancel this feature. To make this selection, press and release the RESET button until "Off," "45 sec.," "5 min.," or "10 min." appears.
- Confirmation of Voice Commands - If Equipped When ON is selected, all voice commands from the UConnect™ system are confirmed. To make this selection, press and release the RESET button until "ON" or "OFF" appears.
- Display Units of Measure in The EVIC, odometer, and navigation system (if equipped) can be changed between English and Metric units of measure. To make this selection, press and release the RESET button until "US" or "METRIC" appears.