Deflector, Wind: Removal
WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
After removal of the wind deflector, discard it, It cannot be reused.
- Move the front glass to the full open position.
- Cut the mesh (1) along the full length of the wind deflector.
- Rotate the wind deflector (4) rearward and out of the slots (3) on each side of the sunroof frame.
- Remove the retaining strip (2) out of the retaining channel. It may be easier to cut into segments and remove.