Rivet Nut And Stud Procedure
Failure to follow these recommendations could result in damage to the vehicle
Rivet nuts or studs are used on the roof to mount the roof rack. Rivet nuts and studs are used for parts installations, when access to the back mounting area is limited or boxed in. It is important to achieve a full seat on the first attempt due to the lack of accessibility on the back side of the rivet nut or stud. Poor seating of the rivet nut or stud will result in part failure, loose parts and possible water leaks.
The use of a commercially available threaded insert tool will be necessary. There are several styles and types readily available. Examples of multi fit choices are the Matco® 203F and the Snap On® HP650M, or you may select one with equivalent capabilities. If a multi fit option is not chosen, it must be capable of a thread size of M6 X 1.00 . Follow the tool manufacturer recommended directions for proper installation.