LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Lamps/Lighting - Exterior (Service Information)) >> Standard Procedure >> Standard Procedure - Lamp Alignment >> Fog Lamp Alignment

Fog Lamp Alignment

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

A properly aimed front fog lamp will project a pattern on the alignment screen 100 millimeters (4 inches) below the fog lamp centerline and straight ahead of the lamp for domestic market vehicles.

  1. Turn the fog lamps ON.
  2. Open the access cover located in the front of the wheel well splash shield.
    GC0173323Courtesy of CHRYSLER GROUP, LLC
  3. Using a screwdriver, rotate the vertical adjustment screw (2) on each lamp to adjust the fog lamp (1) beam height as required.
  4. Close the access cover located in the front of the wheel well splash shield.
scientia non olet · About LEMON Manuals