Lamp, License Plate: Installation: Bulb
WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Always use the correct bulb size and type for replacement. An incorrect bulb size or type may overheat and cause damage to the lamp, the socket or the lamp wiring.
- Align the base of the license plate lamp bulb (2) with the socket (1).
- Push the bulb straight into the socket until the base is firmly seated.
- Reinstall the license plate lamp into the rear fascia.
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.