LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Lamps/Lighting - Exterior (Service Information)) >> Lamp, Fog >> Removal >> Lamp

Lamp, Fog: Removal: Lamp

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Raise the vehicle until the wheel well access cover for the fog lamps can be reached comfortably.
  3. Twist the top rotational button until the top of the cover releases. Rotate the cover 180° allowing full access to the back of the fog lamp and bulb assembly.
  4. Disconnect the harness from the back of the fog lamp assembly.
  5. Remove the four fasteners securing the lamp to the lower front fascia.
  6. Pull the fog lamp through the access hole.
scientia non olet · About LEMON Manuals