Bulb - Overhead Console
WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Always use the correct bulb size and type for replacement. An incorrect bulb size or type may overheat and cause damage to the lamp, the socket or the lamp wiring.
- Align the base of the bulb (2) with the overhead console dome/reading lamp socket (3).
- Push the bulb straight into the socket until the base is fully seated.
- Align the socket and bulb with the keyed opening in the lamp housing (4).
- Insert the bulb and socket straight into the hosing until the socket latch features are both fully engaged.
- Reinstall the overhead console (1) to the headliner.
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.