Lamp - Center
WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Position the dome lamp to the mounting hole in the headliner.
- Reconnect the wire harness connector to the connector on the back of the lamp.
- Set the lamp into the opening in the headliner.
- Gently and evenly press the lens lamp into the mounting hole until the bezel of the lamp housing is snapped flush with the headliner.
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.