LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Occupant Restraint Controller (Orc) - DTCS B0001-11 To B0073-11) >> DTC Troubleshooting >> B0052-13-Passenger SEATBELT Sensor - Circuit Open >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

If the ORC detects the passenger seat belt buckle switch circuits have been open for 2.5 seconds. The active code will change to stored after the ORC verifies the passenger seat belt buckle switch sense circuit voltage has returned to normal voltage range for five seconds. The seatbelt reminder lamp will illuminate in the instrument cluster and an audible alert triggers within a 60 second cycle