Mil Warning Light Flashes

The light flashes engine fault with the engine running.

NOTE:

The light may blink in two different modes: when vehicle starts and stops, or when the vehicle is placed in gear.

1	CHECK FUEL WARNING LIGHT	Result OK	Result Not OK	Action
	Check that the low fuel light is off.	Continue to Step 2	Low fuel warning light lit.	Return the fuel level above the reserve area and continue to Step 4
2	CHECK FUEL LEVEL	Result OK	Result Not OK	Action
	Verify the correct operation of the fuel level indicator.	Continue to Step 3	Fuel gauge does not work	Proceed as indicated in FUEL LEVEL INDICATOR DOES NOT WORK
3	CHECK WITH DIAGNOSTIC TOOL	Result OK	Result Not OK	Action
	Connect a diagnostic scan tool to the DLC. Verify the absence of the error "Ignition failure"	Diagnostic complete	Error Ignition Misfiring is present	Proceed as indicated by the diagnostic tool
4	CANCELLATION AND ERROR CHECKING	Result OK	Result Not OK	Action
	Clear the codes in the Powertrain Control Module using the diagnostic tool. Perform a road test and verify that the error does not recur.	Continue to Step 5	Error Ignition Misfiring is present	Proceed as indicated by the diagnostic tool
5	CHECK PROPER OPERATION	Result OK	Result Not OK	Action
	Verify that the fault is no longer present	Diagnostic complete