LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2016 >> Wrangler Rubicon, Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Instrument Panel >> Cover, Instrument Panel >> Removal >> Removal

Cover, Instrument Panel: Removal: Removal

Fig 1: Removing/Installing Center Harness
GC0131420Courtesy of CHRYSLER GROUP, LLC
  1. Remove the center console. Refer to CONSOLE, CENTER, REMOVAL .
  2. Disconnect the center harness (1) electrical connectors and position aside.
  3. Remove the amplifier, if equipped.
  4. Remove the steering column as necessary. Refer to COLUMN, REMOVAL .
    Fig 2: End Cap
    GC0131421Courtesy of CHRYSLER GROUP, LLC
  5. Using a trim stick (special tool #C-4755, Trim Stick) or equivalent, remove the end caps (1).
  6. Remove the center trim. Refer to BEZEL, INSTRUMENT PANEL, CENTER, REMOVAL .
  7. Remove the radio, if necessary.
  8. Remove the glove box. Refer to GLOVE BOX, INSTRUMENT PANEL, REMOVAL .
  9. Remove the upper I/P tweeter speakers, if necessary.
  10. Remove the cluster bezel. Refer to BEZEL, INSTRUMENT CLUSTER, REMOVAL .
  11. Remove the passenger air bag. Refer to AIR BAG, PASSENGER, REMOVAL .
  12. Remove the glove box striker.
  13. Remove the screws securing the cover to the I/P reinforcement and remove the cover.
scientia non olet · About LEMON Manuals