When Monitored
WARNING: This page is about a different car, the 2015 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
This diagnostic runs continuously when the following conditions are met:
- Enable Conditions for Check 1:
- Ignition is on or the Transmission Control Module (TCM) is in power-on state.
- Engine is not in cranking mode.
- Transmission is shifting and the target gear is the 4th gear.
- Enable Conditions for Check 2:
- Ignition is on or the TCM is in power-on state.
- Engine is not in cranking mode.
- Transmission is shifting and the target gear is the 1st gear.
- Enable Conditions for Check 3:
- Ignition is on or the TCM is in power-on state.
- Engine is not in cranking mode.
- Transmission is shifting and the target gear is the 5th gear.