LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2016 >> Renegade Trailhawk >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System (Abs) - DTCS C1252-86 To U1990-83 >> DTC Troubleshooting >> U1964-83-Message Counter-CRC Fault On Engine 4 Message - Value Of Signal Protection Calculation Incorrect

U1964-83-Message Counter-CRC Fault On Engine 4 Message - Value Of Signal Protection Calculation Incorrect

Perform the COMMUNICATION PRE-DIAGNOSTIC PROCEDURE. Refer to COMMUNICATION PRE-DIAGNOSTIC PROCEDURE .

NOTE:

Treat this DTC as a IMPLAUSIBLE SIGNAL  DTC when performing the COMMUNICATION PRE-DIAGNOSTIC PROCEDURE.

NOTE:

This DTC indicates that the PCM is not sending the required information over the CAN bus. Therefore, the PCM is considered to be the "offending module". The "offending module" will be referred to in the COMMUNICATION PRE-DIAGNOSTIC procedure.