Seat Back, Rear: Disassembly: Disassembly

Fig 1: Latch Bezel

Courtesy of CHRYSLER GROUP, LLC

Remove the screws (1) and remove the latch bezel (2).

Fig 2: Bolts & Latch
Courtesy of CHRYSLER GROUP, LLC
Remove the bolts (2) and remove the latch (1).

Fig 3: Child Tether Bezels
Courtesy of CHRYSLER GROUP, LLC
Remove the screws (1) and remove the tether trim bezels (2).

Fig 4: Headrest Release Tabs
Courtesy of CHRYSLER GROUP, LLC
Remove the headrest.

Fig 5: Zip Strips
Courtesy of CHRYSLER GROUP, LLC
Separate the zip strips (1 and 2).

Fig 6: Inner Cover
Courtesy of CHRYSLER GROUP, LLC
Remove the push pin fasteners (3).
Separate the inner cover (2) from the hooks (1).

Fig 7: Cover Zipper
Courtesy of CHRYSLER GROUP, LLC
Unzip the cover (1).

Fig 8: Foam Insert
Courtesy of CHRYSLER GROUP, LLC

Remove the foam insert (2) from the seat back assembly (1).

Fig 9: Cushion Cover - Hog Rings

Courtesy of CHRYSLER GROUP, LLC

1 - SEAT FOAM CUSHION

2 - HOG RINGS

3 - SEAT CUSHION COVER

Separate the seat cover (3) from the foam cushion (1) and cut off all hog rings (2) attaching the cover to the foam.

Fig 10: Headrest Sleeve Removal
Courtesy of CHRYSLER GROUP, LLC
Squeeze the locking tab (3) and remove the headrest sleeves (1).
Remove the seat back cover and cushion.