LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension & Wheel Alignment >> Front >> Stabilizer Bar, Front >> Removal >> Stabilizer Bar

Stabilizer Bar

Fig 1: Identifying Stabilizer Link (Left) Components
GC0130319Courtesy of CHRYSLER GROUP, LLC
  1. Raise and support the vehicle.
  2. Remove the left upper stabilizer bar link nut (1) from the stabilizer bar.
    Fig 2: Identifying Stabilizer Link (Right) Components
    GC0130328Courtesy of CHRYSLER GROUP, LLC
  3. Remove the right upper stabilizer bar link nut (2) from the stabilizer bar.
  4. Remove the splash shield.
    Fig 3: Identifying Stabilizer Bar Bracket Components
    GC0130310Courtesy of CHRYSLER GROUP, LLC
  5. Remove the right side stabilizer bar bracket bolts (3) to the frame.
  6. Remove the left side stabilizer bar bracket bolts (3) to the frame.
  7. Remove the stabilizer bar (1) to the bench.