LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension & Wheel Alignment >> Front >> Bushing(S) >> Removal >> Axle Bushing

Axle Bushing

Fig 1: View Of Axle Bushing
GC0130312Courtesy of CHRYSLER GROUP, LLC
  1. Remove the upper suspension arm from axle. Refer to ARM, UPPER CONTROL, REMOVAL .
  2. Install the special tool (special tool #9948-3, Nut, Special) Nut (1), (special tool #9948-1, Receiver) Receiver (2) and (special tool #9948-2, Remover, Bushing) Driver (4).
  3. Press the bushing out of the axle housing.
scientia non olet · About LEMON Manuals