Axle Bracket Bushing
Courtesy of CHRYSLER GROUP, LLC
- Remove the upper suspension arm from the axle. Refer to ARM, UPPER CONTROL, REMOVAL .
- Install the Bushing Remover/Installer (special tool #9948, Remover/Installer, Bushing) through the bushing and bracket using the following:
- (special tool #9948-3, Nut, Special) Nut (1)
- (special tool #9948-1, Receiver) Receiver (2)
- (special tool #9948-5, Spacer) Spacer (3)
- (special tool #9948-2, Remover, Bushing) Driver (4)
- Press the bushing out of the axle bracket.