LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension & Wheel Alignment >> Front >> Bushing(S) >> Installation >> Axle Bushing

Axle Bushing

Fig 1: Identifying Axle Bushing Components
GC0130314Courtesy of CHRYSLER GROUP, LLC
  1. Place special tool (special tool #9948-3, Nut, Special) Nut (1), (special tool #9948-4, Installer, Bushing) Driver (2), (special tool #9948-1, Receiver) Receiver (5) and the press the bushing (3) in the axle housing (4).
  2. Remove tools and install the upper suspension arm. Refer to ARM, UPPER CONTROL, REMOVAL .
scientia non olet · About LEMON Manuals