Pulley, Power Steering Pump: Installation: Diesel

Fig 1: Pump, Pulley, Hoses & Bolts - Diesel

Courtesy of CHRYSLER GROUP, LLC

1. Install the pulley (3) to the pump shaft.
2. Install the three bolts (4) securing the pulley (3) to the pump (2). Tighten to 47 N.m (35 ft. lbs.).
   Fig 2: Turbo Air Inlet Tube

   Courtesy of CHRYSLER GROUP, LLC
3. Install the serpentine belt.
4. Install the air inlet tube (1).
5. Install the air cleaner box. Refer to BODY, AIR CLEANER, INSTALLATION .