LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating & Air Conditioning (Service Information) >> Specifications >> Fastener Torque

Fastener Torque

FASTENER TORQUE SPECIFICATIONS

Description N.m Ft. Lbs. In. Lbs.
All Screws NOT Listed Below 1.2 - 10
A/C Compressor Bolts Specific fastener placement and torque pattern required. Refer to COMPRESSOR, A/C, INSTALLATION .
A/C Compressor Clutch Coil Screws 5 - 44
A/C Compressor Shaft Bolt 20 - 177
A/C Compressor Coil Connector Bracket Screw 4.3 - 38
A/C Condenser to Radiator Bolts 5 - 45
A/C Heater Control Screws 2 - 17
Air Inlet Housing to Instrument Panel Support Bolts 4 - 35
Blend Door Lever Screw 0.6 - 5
Discharge Line to Condenser Nut 23 17 -
Discharge Line to Compressor Nut 23 17 -
Expansion Valve Bolts 11 - 97
HVAC Housing to Instrument Panel Support Bolts 4 - 35
Liquid Line to Condenser Nut 23 17 -
Mode Door Cam Screw 0.6 - 5
Receiver/Drier to Condenser Bolt 22 16 -
Suction Line to Compressor Nut 23 17 -
Suction and Liquid Lines to Expansion Valve Nut 20 - 177