LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Nag1 Automatic Transmission (Service Information)) >> Cable, Shift >> Diagnosis And Testing >> Diagnosis And Testing - Gearshift Cable

Diagnosis And Testing - Gearshift Cable

WARNING: This page is about a different variant/trim than selected.
  1. The floor shifter lever and gate positions should be in alignment with all transmission positions, P - R - N - D - 2 - 1 shown in cluster. Misalignment requires cable readjustment.
  2. Engine start must not be possible in any other gear position - if occurs the cable must be readjusted.