LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Nag1 Automatic Transmission (Service Information)) >> Cable, Park Lock >> Diagnosis And Testing >> Diagnosis And Testing - Shift Lock Cable

Diagnosis And Testing - Shift Lock Cable

WARNING: This page is about a different variant/trim than selected.
CONDITION POSSIBLE CAUSES CORRECTION
With the key in ACC (2) or ON (3) position, and BTSI override activated, the shifter cannot be moved out of PARK. Park interlock cable miss-adjust Re-adjust the park interlock cable (Refers to 21-TRANSMISSION AND T/CASE / AUTO TRANS 42RLE / PARK INTERLOCK CABLE)
With the key in LOCK (1) position, and the BTSI override activated the shifter moves out of Park. Park interlock cable miss-adjust Re-adjust the park interlock cable (Refers to 21-TRANSMISSION AND T/CASE / AUTO TRANS 42RLE / PARK INTERLOCK CABLE)
Key trapped in the ignition cylinder Park interlock cable miss-adjust Re-adjust the park interlock cable (Refers to 21-TRANSMISSION AND T/CASE / AUTO TRANS 42RLE / PARK INTERLOCK CABLE)