3.6L Coolant Crossover

WARNING: This page is about a different variant/trim than selected.

Fig 1: Thermostat Housing & Thermostat

Courtesy of CHRYSLER GROUP, LLC

Remove the thermostat housing assembly (1). Refer to THERMOSTAT, REMOVAL .

Fig 2: Drive Belt Tensioners & Assembly With Drive Belt
Courtesy of CHRYSLER GROUP, LLC
Remove the accessory drive belt (7). Refer to BELT, SERPENTINE, REMOVAL .

Fig 3: Coolant Outlet Housing, Water Pump & Bolts
Courtesy of CHRYSLER GROUP, LLC
Remove the Heater supply hose from the coolant crossover (1).
Remove the coolant crossover mounting bolts. Take notice to the four bolts (2) that bolt directly to the timing cover.
Remove the coolant crossover and discard Gaskets.