LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Cooling System) >> Engine >> Bottle, Coolant Recovery >> Removal >> Diesel Engine

Diesel Engine

WARNING: This page is about a different variant/trim than selected.
Fig 1: Coolant Recovery Container - Diesel
GC0130717Courtesy of CHRYSLER GROUP, LLC
  1. Remove coolant recovery container pressure cap (1).
  2. Drain the cooling system. Refer to STANDARD PROCEDURE .
  3. Remove and plug coolant recovery tube (3).
  4. Remove mounting nuts.
  5. Remove coolant recovery container (2) from vehicle.
scientia non olet · About LEMON Manuals