LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Cooling System) >> Accessory Drive >> TENSIONER, Belt >> Removal >> 2.8L

TENSIONER, Belt: Removal: 2.8L

WARNING: This page is about a different variant/trim than selected.
Fig 1: Accessory Drive Belt & Drive Belt Tensioner
GC0145396Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect the negative battery cable.
  2. Remove accessory drive belt (1). Refer to BELT, SERPENTINE, REMOVAL .
  3. Remove bolt and the serpentine belt tensioner (2).
scientia non olet · About LEMON Manuals