Diagnostic Test
WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
CHECK FOR AN ACTIVE DTC
- Turn the ignition on.
- Open and close Driver Door 3 times.
- With the scan tool, the read DTCs.
Does the scan tool display this DTC as active?
Yes
- Inspect the Driver Door Latch for debris or foreign material that may cause a sticking condition. If no problems are found, replace the Driver Door Latch in accordance with the Service Information. Refer to LATCH, DOOR
- Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .
No
- The condition or conditions that originally set this DTC are not present at this time. Using the wiring diagrams as a guide, check all related splices and connectors for signs of water intrusion, corrosion, pushed out or bent terminals and correct pin tension. If no problems are found, test complete.
- Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .