LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 ((Powertrain Control Module (Pcm) - Electrical Diagnostics - 40TE Automatic Transmission)) >> DTC Troubleshooting >> P0884-Power Up At Speed >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.

This DTC will set if the Powertrain Control Module (PCM) powers up and senses the vehicle in a valid forward gear (no PRNDL DTCs) with an output speed above 800 RPM, approximately 32 Km/h (20 mph).