LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (3.6L - DTCS P0158 To P0462) >> Diagnosis And Testing >> P0325-Knock Sensor 1 Circuit >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.

The Powertrain Control Module (PCM) detects that the Knock Sensor input voltage is: Above 4.0 volts, less than or equal to 1.0 volts with engine RPM at or above 2200 or equal to 0.0 volts with engine RPM below 2200. Two Trip Fault. Three good trips to turn off the MIL.