LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (3.6L - DTCS P000A To P0157) >> Diagnosis And Testing >> P0018-Crankshaft Position - Camshaft Position Correlation Bank 2 Sensor 1 >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.

Powertrain Control Module (PCM) detects an error when the Camshaft position is out of phase with the Crankshaft position. One Trip Fault. Three good trips to turn off the MIL.

scientia non olet · About LEMON Manuals