LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (Body Control Module (BCM) - DTCS B1830-11 To U1433-24) >> Diagnosis And Testing >> U1433-23-Implausible Ignition Switch Status Message Received - Signal Stuck Low >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.

The BCM detects that the hardwired ignition switch input voltage from the RF Hub module indicates that the ignition switch is in the off position, but the CAN bus message indicates that the ignition switch is the run position for more than 10 seconds.