Set Condition
WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
If voltage on the (F945) Fused Ignition Switch Output (Run-Start) circuit drops below 6.0 volts and (F929) Fused (Run Only) circuit voltage is greater then or equal to 9 volts for 15 seconds in the bussed ignition RUN position. The code will go from active to stored if the (F945) Ignition (Run-Start) circuit voltage is equal or above 6 volts for 5 seconds.