LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Occupant Restraint Controller (Orc) - DTCS B1B00 To B1C19) >> Diagnosis And Testing >> B1B51-1ST Row Driver SEATBELT Sensor Circuit High >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.

If the ORC detects a short to voltage on the Driver Seat Belt Buckle Switch circuits for 2.5 seconds. The active code will change to stored after the ORC verifies the seat belt switch sensor circuit voltage has returned to normal voltage range for five seconds.

scientia non olet · About LEMON Manuals