Rotor, Brake: Specifications: Specifications
WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
When refacing a rotor, the required TIR (Total Indicator Reading) limits MUST BE MAINTAINED. Extreme care in the operation of rotor turning (machining) equipment is required.
LIMITS/SPECIFICATIONS
| Brake Rotor | Rotor Thickness | Minimum Rotor Thickness | Rotor Runout * |
|---|---|---|---|
| Front | 27.87-28.13 mm | 26.4 mm | 0.050 mm |
| 1.097-1.107 in. | 1.040 in | 0.002 in. | |
| Rear | 11.75-12.25 mm | 10.4 mm | 0.050 mm |
| 0.463-0.482 in. | 0.409 in. | 0.002 in. | |
| * TIR Total Indicator Reading (Measured On Vehicle) | |||