LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (62TE Automatic Transmission (Service Information)) >> Seal, Differential >> Installation >> Right

Seal, Differential: Installation: Right

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Differential Output Bearing Cover & Bolts
GC0122542Courtesy of CHRYSLER GROUP, LLC
  1. Clean the transaxle case and apply MOPAR® ATF RTV (MS-GF41).
  2. Position the transmission extension assembly (2), install the bolts (1) and tighten to 12 N.m (105 in. lbs.).
  3. Install axle shaft. Refer to INSTALLATION for front, or INSTALLATION for rear.
  4. Check transaxle fluid level and adjust as necessary. Refer to FLUID, STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals