LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (62TE Automatic Transmission (Service Information)) >> Cable, Shift >> Removal >> Removal

Cable, Shift: Removal: Removal

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Center Console
GC0122433Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect battery negative cable.
  2. Remove the center console. Refer to CONSOLE, CENTER, REMOVAL .
    Fig 2: Identifying Shift Cable AT Shifter
    GC0122247Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect and remove gearshift cable (2, 3) from shift mechanism.
  4. Remove the air bag module and the dynamics sensor. Refer to MODULE, OCCUPANT RESTRAINT CONTROLLER, REMOVAL .
  5. Remove the shift cable at the transmission and pull cable through.