LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 ((Radio Frequency (RF Hub) Module - Electrical Diagnostics)) >> DTC Troubleshooting >> B1A7D-01-Start Button - General Electrical Failure >> When Monitored

When Monitored

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.

Any time the Start/Stop Button is pressed, the Radio Frequency Hub (RF Hub) will check the (D122) Security K Line Communication circuit and the (G201) Ignition Switch Position Signal circuit. It samples these circuits every 10 ms. while the button is pressed.

scientia non olet · About LEMON Manuals