LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2014 >> Wrangler Sahara, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Tires & Wheels (Service Information)) >> Diagnosis And Testing >> Diagnosis And Testing - Tire And Wheel Vibration >> Tire/Wheel Balance And Road Force Variation

Tire/Wheel Balance And Road Force Variation

WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

If wheel balance equipment is capable of testing tire road force variation and the tire/wheel assemblies are within specification, place the tires with the greater road force variation on the rear of the vehicle.

Balance the tire and wheel assemblies as necessary, and if wheel balance equipment is capable, also test for tire and wheel runout and road force variation following the wheel balancer manufacturer's instructions and using the information listed in Tire And Wheel Balance. Refer to STANDARD PROCEDURE . Repeat the road test above to verify the vibration is repaired.