Lamp, Courtesy, Liftgate: Removal: Lamp
WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the battery negative cable.
- Using a thin flat-bladed tool, gently pry between one end of the lamp lens (1) and the lower liftgate trim panel (2) to remove the lens from the liftgate lamp housing.
- Using a thin flat-bladed tool, depress the tabs (2) integral to the lamp housing to release the lamp from the opening in the lower liftgate trim panel.
- Pull the lamp out from the trim panel far enough to access and disconnect the liftgate wire harness connector (1) from the connector receptacle integral to the end of the lamp housing.
- Remove the liftgate courtesy lamp from the vehicle.